Hier werden die Unterschiede zwischen zwei Versionen angezeigt.
Beide Seiten der vorigen Revision Vorhergehende Überarbeitung | |||
brother [2015/08/24 21:54] admin [Brother HL-5450DN] |
brother [2015/08/24 21:54] (aktuell) admin [Drum Led blinkt] |
||
---|---|---|---|
Zeile 10: | Zeile 10: | ||
http://www.zinetic.co.uk/brother_hl_2030___2030b_drum_unit_reset_instructions-details.aspx | http://www.zinetic.co.uk/brother_hl_2030___2030b_drum_unit_reset_instructions-details.aspx | ||
- | 1.Remove the drum unit and toner cartridge. Wait 1 or 2 minutes. | + | 1. Remove the drum unit and toner cartridge. Wait 1 or 2 minutes. |
- | 2.Replace the drum unit and toner cartridge into printer. | + | 2. Replace the drum unit and toner cartridge into printer. |
- | 3.The Drum LED continues to blink if the drum counter was not reset when you replaced the drum. We need to reset this now! | + | 3. The Drum LED continues to blink if the drum counter was not reset when you replaced the drum. We need to reset this now! |
- | 4.Open the front cover of the printer | + | 4. Open the front cover of the printer |
- | 5.Press and hold down Go button for about 4 seconds until all the LEDs light up. | + | 5. Press and hold down Go button for about 4 seconds until all the LEDs light up. |
- | 6.Once all 4 LEDs are lit, release the Go button | + | 6. Once all 4 LEDs are lit, release the Go button |
- | 7.Close the front cover. | + | 7. Close the front cover. |
- | 8.Your drum is now reset. | + | 8. Your drum is now reset. |
| | ||
===== Brother HL-5450DN ===== | ===== Brother HL-5450DN ===== |