Benutzer-Werkzeuge

Webseiten-Werkzeuge


brother

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

Link zu dieser Vergleichsansicht

Beide Seiten der vorigen RevisionVorhergehende Überarbeitung
brother [2015/08/24 21:54] – [Brother HL-5450DN] adminbrother [2015/08/24 21:54] (aktuell) – [Drum Led blinkt] admin
Zeile 10: Zeile 10:
 http://www.zinetic.co.uk/brother_hl_2030___2030b_drum_unit_reset_instructions-details.aspx http://www.zinetic.co.uk/brother_hl_2030___2030b_drum_unit_reset_instructions-details.aspx
  
-  1.Remove the drum unit and toner cartridge. Wait 1 or 2  minutes. +  1. Remove the drum unit and toner cartridge. Wait 1 or 2  minutes. 
-  2.Replace the drum unit and toner cartridge into printer. +  2. Replace the drum unit and toner cartridge into printer. 
-  3.The Drum LED continues to blink if the drum counter was not reset when you replaced the drum. We need to reset this now! +  3. The Drum LED continues to blink if the drum counter was not reset when you replaced the drum. We need to reset this now! 
-  4.Open the front cover of the printer +  4. Open the front cover of the printer 
-  5.Press and hold down Go button for about 4 seconds until all the LEDs light up. +  5. Press and hold down Go button for about 4 seconds until all the LEDs light up. 
-  6.Once all 4 LEDs are lit, release the Go button +  6. Once all 4 LEDs are lit, release the Go button 
-  7.Close the front cover. +  7. Close the front cover. 
-  8.Your drum is now reset.+  8. Your drum is now reset.
      
 ===== Brother HL-5450DN ===== ===== Brother HL-5450DN =====
brother.1440446060.txt.gz · Zuletzt geändert: von admin