Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- v_lizedlab [2014/07/09 15:34] – admin
+++ v_lizedlab [2015/12/09 22:31] (aktuell) – [VlizedLab] admin
@@ Zeile 1: / Zeile 1: @@
-====== V'lizedlab ======
+====== VlizedLab ======
+[[USB-Stick einbinden]]
+[[Zugriff auf eine DVD]]
 ===== Download =====
 http://proxy.asn-graz.ac.at/~d4e/experimental/
-  tar xvfj vlizedlab.i586.tar.bz2 -C /
   tar xvfj vlizedlab.x86_64.tar.bz2 -C /
@@ Zeile 38: / Zeile 41: @@
   *Standardbenutzer
-    * root : vlizedlab
+    * root : open23
     * student : student
@@ Zeile 280: / Zeile 283: @@
 #VBoxManage --nologo storageattach $MACHINE --storagectl C$MACHINE --port 1 --device 0 \
 #      --type dvddrive --medium $MACHINEDIR/d4e2012.i586.iso
+</code>
+==== Windows 8 ====
+<code bash /vm/vb/Windows8/init.add.sh>
+VBoxManage --nologo modifyvm $MACHINE --synthcpu on --memory 3000 --vram 21 --pae on --ioapic on --hwvirtex on --bioslogofadein off --bioslogofadeout off --bioslogodisplaytime 1 --nic1 nat --audio alsa --accelerate2dvideo off --accelerate3d off
+VBoxManage --nologo modifyvm $MACHINE   --ostype "Windows8"
+VBoxManage --nologo modifyvm $MACHINE   --nictype1 "82540EM" --audiocontroller hda
+VBoxManage --nologo storagectl    $MACHINE --name C$MACHINE --add sata --controller IntelAHCI --hostiocache on
+VBoxManage --nologo sharedfolder add $MACHINE  --name media --hostpath /media --automount
+mtyp="immutable"
+#mtyp="normal"
+VBoxManage --nologo storageattach $MACHINE --storagectl C$MACHINE --port 1 --device 0 \
+      --type hdd --medium $MACHINEDIR/$MACHINE.vdi --mtype $mtyp
+#VBoxManage --nologo storageattach $MACHINE --storagectl C$MACHINE --port 1 --device 0 \
+#      --type dvddrive --medium $MACHINEDIR/de_windows_8_x64_x86_aio.iso
 </code>
@@ Zeile 295: / Zeile 318: @@
 </code>
+==== Lernstick ====
+<code bash /vm/vb/lernstick/init.add.sh>
+#!/bin/bash
+MACHINE="geogebra"
+MACHINEDIR="/home/matthias/Downloads/geogebra"
+rm -rf $MACHINEDIR/$MACHINE
+VBoxManage --nologo createvm --name $MACHINE --register --basefolder $MACHINEDIR
+VBoxManage --nologo modifyvm $MACHINE --synthcpu on --memory 1536 --vram 21 --ioapic on --hwvirtex off --bioslogofadein off --bioslogofadeout off --bioslogodisplaytime 1 --nic1 nat --audio alsa --accelerate2dvideo on --accelerate3d on
+VBoxManage --nologo modifyvm $MACHINE   --ostype "Debian"
+VBoxManage --nologo modifyvm $MACHINE   --chipset piix3 --pagefusion on
+VBoxManage --nologo storagectl    $MACHINE --name C$MACHINE --add ide --controller PIIX4 --hostiocache on
+VBoxManage --nologo modifyvm $MACHINE   --mouse usbtablet
+VBoxManage --nologo storageattach $MACHINE --storagectl C$MACHINE --port 1 --device 0 \
+      --type dvddrive --medium $MACHINEDIR/geogebra-lernstick-2014-02-18.iso
+VBoxManage --nologo startvm $MACHINE 2>&1 3>&1
+</code>
 ===== Dateien und Ordner auf alle Clients übertragen =====
@@ Zeile 346: / Zeile 392: @@
   mkdir /media/sda3/{dev,proc,sys,vm}
-  rn /media/sda1/etc/udev/rules.d/70-persistent-net.rules
+  rm /media/sda1/etc/udev/rules.d/70-persistent-net.rules
   mount --bind /proc /media/sda1/proc
@@ Zeile 363: / Zeile 409: @@
   *planck:/opt/wartung/vlizedlab #
-  klonen.sh  ping.sh  reboot.sh  setwol.sh  shutdown.sh  ssh.sh  startvm.sh  transfer.sh  view.sh  wakeup.sh  wakeup_single.sh
+<code ini /etc/dhcpd.conf>
+authoritative;
+ddns-update-style none;
+# eth2 unterrichtsnetz
+subnet 192.168.100.0 netmask 255.255.255.0 {
+  authoritative;
+  range 192.168.100.161 192.168.100.200;
+  range 192.168.100.30 192.168.100.100;
+  default-lease-time 14400;
+  max-lease-time 172800;
+  option broadcast-address 192.168.100.255;
+  option routers 192.168.100.254;
+  option subnet-mask 255.255.255.0;
+  option netbios-name-servers 192.168.100.254;
+  option netbios-node-type 8;
+  option domain-name-servers 193.170.221.1, 8.8.4.4, 8.8.8.8;
+  option ntp-servers 193.170.221.1;
+  # pxe
+  filename "pxelinux.0";
+  next-server 192.168.100.14;
+}
+# AULA HP xw4400 Workstation
+host aula01 { hardware ethernet 00:1c:c4:32:0b:b7; fixed-address 192.168.100.74; }
+host aula02 { hardware ethernet 00:15:60:a4:48:7f; fixed-address 192.168.100.75; }
+host aula03 { hardware ethernet 00:1b:78:b0:8c:2c; fixed-address 192.168.100.76; }
+host aula04 { hardware ethernet 00:1c:c4:32:0a:30; fixed-address 192.168.100.77; }
+host aula05 { hardware ethernet 00:1c:c4:32:07:88; fixed-address 192.168.100.78; }
+host aula06 { hardware ethernet 00:1b:78:b0:86:50; fixed-address 192.168.100.79; }
+host aula07 { hardware ethernet 00:1b:78:a5:f6:c2; fixed-address 192.168.100.80; }
+host aula08 { hardware ethernet 00:1c:c4:32:0b:a0; fixed-address 192.168.100.81; }
+host aula09 { hardware ethernet 00:1c:c4:32:07:34; fixed-address 192.168.100.82; }
+host aula10 { hardware ethernet 00:1c:c4:32:0b:e5; fixed-address 192.168.100.83; }
+host aula11 { hardware ethernet 00:1c:c4:32:0b:db; fixed-address 192.168.100.84; }
+host aula12 { hardware ethernet 00:1c:c4:32:0b:a1; fixed-address 192.168.100.85; }
+# eth1 verwaltungsnetz
+subnet 192.168.238.0 netmask 255.255.255.0 {
+  range 192.168.238.100 192.168.238.200;
+  default-lease-time 345600;
+  max-lease-time 691200;
+  option broadcast-address 192.168.238.255;
+  option routers 192.168.238.254;
+  option subnet-mask 255.255.255.0;
+  option netbios-name-servers 193.170.221.1;
+  option domain-name-servers 8.8.8.8, 193.170.221.1, 8.8.8.8;
+  option ntp-servers 193.170.221.1;
+}
+</code>
+<code bash klonen.sh>
+#!/bin/bash
+if [ "$1" != "eg" ] && [ "$1" != "ikt" ] &&[ "$1" != "aula" ] &&[ "$1" != "ug" ] &&[ "$1" != "klabu" ]; then
+ echo "eg / ikt / aula / ug / klabu"
+ exit
+fi
+clients=`awk '/'$1'/ {print $2}' /etc/dhcpd.conf`
+if [ "$1" == "ikt" ]; then
+ MUSTERRECHNER="192.168.100.130"
+elif [ "$1" == "klabu" ]; then
+ MUSTERRECHNER="192.168.100.86"
+elif [ "$1" == "aula" ]; then
+ MUSTERRECHNER="192.168.100.74"
+elif [ "$1" == "eg" ]; then
+ MUSTERRECHNER="192.168.100.60"
+elif [ "$1" == "ug" ]; then
+ MUSTERRECHNER="192.168.100.109"
+fi
+for client in $clients; do
+ echo $client
+ IP=`awk '/'$client'/ {print $8}' /etc/dhcpd.conf | tr -d ";"`
+ if [ "$IP" != "$MUSTERRECHNER" ]; then
+  /usr/bin/expect -c " spawn /usr/bin/ssh -q -l root $IP \" killall udp-receiver; killall VirtualBox; vlinitvbox; killall screen; rm -rf /var/run/screen; mkdir /var/run/screen; chown root:utmp /var/run/screen; screen -dm -S udp vludpreceiveVMs;   \" ;\
+  expect \"word: \" {send \"PASSWORT\r\" } ;\
+  interact "
+ fi
+done
+</code>
+<code bash transfer.sh>
+#!/bin/bash
+if [ "$1" != "eg" ] && [ "$1" != "ikt" ] &&[ "$1" != "aula" ] &&[ "$1" != "ug" ] &&[ "$1" != "klabu" ]; then
+ echo "eg / ikt / aula / ug / klabu"
+ exit
+fi
+clients=`awk '/'$1'/ {print $2}' /etc/dhcpd.conf`
+if [ "$1" == "ikt" ]; then
+ MUSTERRECHNER="192.168.100.130"
+elif [ "$1" == "klabu" ]; then
+ MUSTERRECHNER="192.168.100.86"
+elif [ "$1" == "aula" ]; then
+ MUSTERRECHNER="192.168.100.74"
+elif [ "$1" == "eg" ]; then
+ MUSTERRECHNER="192.168.100.60"
+elif [ "$1" == "ug" ]; then
+ MUSTERRECHNER="192.168.100.109"
+fi
+for client in $clients; do
+ echo $client
+ IP=`awk '/'$client'/ {print $8}' /etc/dhcpd.conf | tr -d ";"`
+ if [ "$IP" != "$MUSTERRECHNER" ]; then
+  /usr/bin/expect -c " spawn /usr/bin/ssh -q -l root $IP \" killall screen; rm -rf /var/run/screen; mkdir /var/run/screen; chown root:utmp /var/run/screen; screen -dm -S udp /usr/local/bin/getfiles;  \" ;\
+  expect \"word: \" {send \"PASSWORT\r\" } ;\
+  interact "
+ fi
+done
+</code>
+<code bash ping.sh>
+#!/bin/bash
+if [ "$1" != "eg" ] && [ "$1" != "ikt" ] &&[ "$1" != "aula" ] &&[ "$1" != "ug" ] &&[ "$1" != "klabu" ]; then
+ echo "eg / ikt / aula / ug / klabu"
+ exit
+fi
+clients=`awk '/'$1'/ {print $2}' /etc/dhcpd.conf`
+for client in $clients; do
+ echo $client
+ IP=`awk '/'$client'/ {print $8}' /etc/dhcpd.conf | tr -d ";"`
+ nmap -sP  $IP | grep "host up" 2>&1 >/dev/null &&  echo -e "\033[45;1;32m=> $IP : ON \033[0m" || echo -e "\033[44;1;33m=> $IP : OFF \033[0m"
+done
+</file>
+<code bash wakeup.sh>
+#!/bin/bash
+if [ "$1" != "eg" ] && [ "$1" != "ikt" ] &&[ "$1" != "aula" ] &&[ "$1" != "ug" ] &&[ "$1" != "klabu" ]; then
+ echo "eg / ikt / aula / ug / klabu"
+ exit
+fi
+clients=`awk '/'$1'/ {print $2}' /etc/dhcpd.conf`
+for client in $clients; do
+ if [ "$1" == "klabu" ]; then sleep 0.5; else sleep 0.1; fi
+ echo $client
+ MAC=`awk '/'$client'/ {print $6}' /etc/dhcpd.conf | tr -d ";"`
+ for i in {1..17}
+ do
+        /usr/sbin/ether-wake -i eth2 $MAC
+ done
+done
+</code>
+<code bash shutdown.sh>
+#!/bin/bash
+if [ "$1" != "eg" ] && [ "$1" != "ikt" ] &&[ "$1" != "aula" ] &&[ "$1" != "ug" ] &&[ "$1" != "klabu" ]; then
+ echo "eg / ikt / aula / ug / klabu"
+ exit
+fi
+clients=`awk '/'$1'/ {print $2}' /etc/dhcpd.conf`
+if [ "$1" == "ikt" ]; then
+ MUSTERRECHNER="192.168.100.130"
+elif [ "$1" == "klabu" ]; then
+ MUSTERRECHNER="192.168.100.86"
+elif [ "$1" == "aula" ]; then
+ MUSTERRECHNER="192.168.100.74"
+elif [ "$1" == "eg" ]; then
+ MUSTERRECHNER="192.168.100.60"
+elif [ "$1" == "ug" ]; then
+ MUSTERRECHNER="192.168.100.109"
+fi
+for client in $clients; do
+ echo $client
+ IP=`awk '/'$client'/ {print $8}' /etc/dhcpd.conf | tr -d ";"`
+# if [ "$IP" != "$MUSTERRECHNER" ]; then
+  /usr/bin/expect -c " spawn /usr/bin/ssh -q -l root $IP \" poweroff; exit \" ;\
+  expect \"word: \" {send \"PASSWORT\r\" } ;\
+  interact "
+# fi
+done
+</code>
 ===== Randnotizen =====
@@ Zeile 374: / Zeile 609: @@
   *[[VL Lehrer]]
+===== Wartung =====
+  *[[Wartung Kurzversion]]
+  *[[http://peer.st/dw/doku.php?id=nx-client|NX CLient für Linux starten ...]]
+===Zu einem Client verbinden===
+  feynman:~ # sh view.sh 192.168.100.xx
+  Kennwort: eu...
+  Clients sind auf Plank unter /etc/dhcpd.conf zu finden
+===Clients aktualisieren:===
+  Login auf Planck
+  cd /opt/wartung/vlizedlab
+  Check ob alle PCs im Saal laufen:
+  sh ping.sh ug
+===Alle PCs im UG einschalten===
+  sh wakeup.sh ug
+=== Einzelnen PC wecken: ===
+  sh wakeup_single.sh ug01
+=== Mit Musterrechner verbinden ===
+  ssh ug01 (eu...)
+=== Laufende VM "killen" ===
+  killall VirtualBox; vlinitvbox
+=== Konfiguration der VM ändern ===
+  vi /vm/vb/Windows7/init.add.sh
+=== Folgende beiden Zeilen sind für das "readonly"-schalten wichtig ===
+  #mtyp="immutable"	-> nur lesend
+  mtyp="normal"		-> schreiben & lesen
+=== Konfiguration "speichern" ===
+  killall VirtualBox; vlinitvbox
+=== Via NX zum Client verbinden bzw. hingehen ===
+  Änderungen durchführen
+=== Windows und Office Aktivierung ===
+  Lokal als .\root (uS...) anmelden
+  Startmenü -> cmd -> rechte Maustaste -> Als Administrator ausführen:
+=== Nur Windows lizenzieren ===
+  cscript slmgr.vbs -skms kms.lsr-stmk.gv.at
+  cscript slmgr.vbs -ato
+=== Nur Office lizenzieren ===
+  cscript "\Program Files\Microsoft Office\Office14\ospp.vbs" /sethst:kms.lsr-stmk.gv.at
+  cscript "\Program Files\Microsoft Office\Office14\ospp.vbs" /act
+=== Wenn nicht erfolgreich, dann auf Planck ===
+  ifdown dsl0
+  ifup dsl0
+... etwas Geduld ...
+  ping kms.lsr-stmk.gv.at muss funktionieren!
+Rechner sauber herunterfahren!
+=== Konfiguration der VM wieder zurück ändern ===
+  vi /vm/vb/Windows7/init.add.sh
+  mtyp="immutable"	-> nur lesend
+  #mtyp="normal"	-> schreiben & lesen
+  killall VirtualBox; vlinitvbox
+=== Klonen ===
+  Am Planck kontrollieren, ob wirklich alle Rechner laufen.
+  cd /opt/wartung/vlizedlab
+  sh ping.sh ug
+=== Client zum Lauschen bringen ===
+  sh klonen.sh ug
+=== Am Musterrechner eine screen Sitzung starten ===
+  Wenn diese Fehlermmeldung kommt:
+  Directory '/var/run/screen' must have mode 777.
+Dann
+  chmod 777 /var/run/screen
+  und nochmals "screen" starten
+  vludpsendVMs
+  -> "Blauer" Bildschirm erscheint, gewünschte VM zum Klonen auswählen,
+  Liste der Clients die Lauschen erscheint -> Bestätigen...
+  Strg+A und D screen in den Hintergrund legen
+  Nach dem Klonen unbedingt alle Clients komplett neu starten, am besten
+  via Planck:
+  sh reboot.sh ug
+  Bisschen warten... und erneut verbinden.
+  Enjoy!