• kinternet installieren ???
• Bei Erstinstallation zuvor einmal Installation unter Windows ausführen ???

• DHCP

10.0.0.38 aon

nameserver 195.3.96.67
nameserver 195.3.96.68

name "1234567890"
noipdefault
noauth
lcp-echo-interval 30
lcp-echo-failure 4
defaultroute
replacedefaultroute

#Benutzername     *     Persönliches Kennwort
1234567890        *     abcdefgh

• pptp aon

• killall pppd
• killall pptp

#! /bin/sh
# Copyright (c) 1995-2002 SuSE Linux AG, Nuernberg, Germany.
# All rights reserved.
#
# Author: Kurt Garloff <feedback@suse.de>
#
# Modified: Dieter Hoefler
#
#
# /etc/init.d/adsl
#
#
# LSB compatible service control script; see http://www.linuxbase.org/spec/
#
#
### BEGIN INIT INFO
# Provides:          adsl
# Required-Start:    $syslog $network $named
# X-UnitedLinux-Should-Start: $ALL
# Required-Stop:     $syslog $remote_fs
# X-UnitedLinux-Should-Stop:
# Default-Start:     3 5
# Default-Stop:
# Description:       Start ADSL over PPtP
### END INIT INFO


ADSL_BIN=/usr/sbin/pptp
test -x $ADSL_BIN || exit 5


. /etc/rc.status
rc_reset

case "$1" in
    start)
	echo -n "Starting ADSL"
	startproc $ADSL_BIN aon
	# Remember status and be verbose
	rc_status -v
	;;
    stop)
	echo -n "Shutting down ADSL"
	## Stop daemon with killproc(8) and if this fails
	## set echo the echo return value.

	killproc -TERM $ADSL_BIN

	# Remember status and be verbose
	rc_status -v
	;;
    try-restart)
	## Stop the service and if this succeeds (i.e. the
	## service was running before), start it again.
	$0 stop  &&  $0 start

	# Remember status and be quiet
	rc_status
	;;
    restart)
	## Stop the service and regardless of whether it was
	## running or not, start it again.
	$0 stop
	$0 start

	# Remember status and be quiet
	rc_status
	;;
    status)
	echo -n "Checking for service ADSL "
	## Check status with checkproc(8), if process is running
	## checkproc will return with exit status 0.

	# Return value is slightly different for the status command:
	# 0 - service up and running
	# 1 - service dead, but /var/run/  pid  file exists
	# 2 - service dead, but /var/lock/ lock file exists
	# 3 - service not running (unused)
	# 4 - service status unknown :-(
	# 5--199 reserved (5--99 LSB, 100--149 distro, 150--199 appl.)

	# NOTE: checkproc returns LSB compliant status values.
	checkproc $ADSL_BIN
	# NOTE: rc_status knows that we called this init script with
	# "status" option and adapts its messages accordingly.
	rc_status -v
	;;
    *)
	echo "Usage: $0 {start|stop|status|try-restart|restart}"
	exit 1
	;;
esac
rc_exit

• /etc/init.d/insserv adsl ⇒ Start- und Stoppskripte im Runlevel 3 und 5

Das wichtigste, und einzige, auf das man schauen muss ist,
dass man das Protokoll auf pptp umstellt wie auf folgenden Screeshots zu
sehen ist. Dann einen neuen Provider hinzufügen, Benutzername und
Passwort eintragen und die idle-timeout Zeit ist noch auf 0 zu stellen;
und fertig.