br0 Link encap:Ethernet Hardware Adresse 9C:B6:54:B8:FA:88
inet Adresse:193.170.221.5 Bcast:193.170.221.7 Maske:255.255.255.248
-> eth2 (neue, externe Karte!)
br1 Link encap:Ethernet Hardware Adresse 9C:8E:99:31:71:62
inet Adresse:192.168.238.253 Bcast:192.168.239.255 Maske:255.255.254.0
-> eth0 (unten)
br2 Link encap:Ethernet Hardware Adresse 9C:8E:99:31:71:63
inet Adresse:192.168.100.15 Bcast:192.168.101.255 Maske:255.255.254.0
-> eth1 (oben)
sommerfeld:~ # hpacucli ctrl all show config | grep logicaldrive
logicaldrive 1 (465.7 GB, RAID 1, OK)
sommerfeld:~ # hpacucli ctrl all show config detail
Smart Array B110i SATA RAID in Slot 0 (Embedded)
Bus Interface: PCI
Slot: 0
RAID 6 (ADG) Status: Disabled
Controller Status: OK
Hardware Revision: Unknown
RAID Stack Version: 1.42-1
Rebuild Priority: Medium
Expand Priority: Medium
Surface Scan Delay: 15 secs
Surface Scan Mode: Idle
Post Prompt Timeout: 45 secs
Cache Board Present: False
Drive Write Cache: Disabled
Total Cache Size: 0 MB
SATA NCQ Supported: True
Array: A
Interface Type: SATA
Unused Space: 0 MB
Status: OK
Array Type: Data
Logical Drive: 1
Size: 465.7 GB
Fault Tolerance: 1
Heads: 255
Sectors Per Track: 63
Cylinders: 60797
Strip Size: 128 KB
Full Stripe Size: 128 KB
Status: OK
Caching: Disabled
Unique Identifier: 600508B1001FFFFFA00B5E4100000000
Disk Name: /dev/sda
Mount Points: / 463.7 GB
OS Status: LOCKED
Logical Drive Label: A00B5E410000
Drive Type: Data
physicaldrive 1I:1:1
Port: 1I
Box: 1
Bay: 1
Status: OK
Drive Type: Data Drive
Interface Type: SATA
Size: 500 GB
Rotational Speed: 7200
Firmware Revision: HPG0
Serial Number: Z1M05L2Q
Model: ATA MB0500EBZQA
SATA NCQ Capable: True
SATA NCQ Enabled: True
PHY Count: 1
PHY Transfer Rate: 3.0Gbps
physicaldrive 2I:1:2
Port: 2I
Box: 1
Bay: 2
Status: OK
Drive Type: Data Drive
Interface Type: SATA
Size: 500 GB
Firmware Revision: 12.01C01
Serial Number: WD-WCAPW2778805
Model: ATA WDC WD5000AAKS-6
SATA NCQ Capable: True
SATA NCQ Enabled: True
PHY Count: 1
PHY Transfer Rate: 3.0Gbps
total_memory : 24414