br0 Link encap:Ethernet Hardware Adresse 9C:B6:54:B8:FA:88 inet Adresse:193.170.221.5 Bcast:193.170.221.7 Maske:255.255.255.248 -> eth2 (neue, externe Karte!) br1 Link encap:Ethernet Hardware Adresse 9C:8E:99:31:71:62 inet Adresse:192.168.238.253 Bcast:192.168.239.255 Maske:255.255.254.0 -> eth0 (unten) br2 Link encap:Ethernet Hardware Adresse 9C:8E:99:31:71:63 inet Adresse:192.168.100.15 Bcast:192.168.101.255 Maske:255.255.254.0 -> eth1 (oben)
sommerfeld:~ # hpacucli ctrl all show config | grep logicaldrive logicaldrive 1 (465.7 GB, RAID 1, OK) sommerfeld:~ # hpacucli ctrl all show config detail Smart Array B110i SATA RAID in Slot 0 (Embedded) Bus Interface: PCI Slot: 0 RAID 6 (ADG) Status: Disabled Controller Status: OK Hardware Revision: Unknown RAID Stack Version: 1.42-1 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 15 secs Surface Scan Mode: Idle Post Prompt Timeout: 45 secs Cache Board Present: False Drive Write Cache: Disabled Total Cache Size: 0 MB SATA NCQ Supported: True Array: A Interface Type: SATA Unused Space: 0 MB Status: OK Array Type: Data Logical Drive: 1 Size: 465.7 GB Fault Tolerance: 1 Heads: 255 Sectors Per Track: 63 Cylinders: 60797 Strip Size: 128 KB Full Stripe Size: 128 KB Status: OK Caching: Disabled Unique Identifier: 600508B1001FFFFFA00B5E4100000000 Disk Name: /dev/sda Mount Points: / 463.7 GB OS Status: LOCKED Logical Drive Label: A00B5E410000 Drive Type: Data physicaldrive 1I:1:1 Port: 1I Box: 1 Bay: 1 Status: OK Drive Type: Data Drive Interface Type: SATA Size: 500 GB Rotational Speed: 7200 Firmware Revision: HPG0 Serial Number: Z1M05L2Q Model: ATA MB0500EBZQA SATA NCQ Capable: True SATA NCQ Enabled: True PHY Count: 1 PHY Transfer Rate: 3.0Gbps physicaldrive 2I:1:2 Port: 2I Box: 1 Bay: 2 Status: OK Drive Type: Data Drive Interface Type: SATA Size: 500 GB Firmware Revision: 12.01C01 Serial Number: WD-WCAPW2778805 Model: ATA WDC WD5000AAKS-6 SATA NCQ Capable: True SATA NCQ Enabled: True PHY Count: 1 PHY Transfer Rate: 3.0Gbps
total_memory : 24414