Richard Feynman war nicht nur einer der größten Physik des 20. Jahrhunderts sondern ist auch der Namensgeber für unseren neuen XEN Wunder-Server. Die Konfiguration erfolgt in wenigen Schritten:

Von SLES 11, SP1 booten

bei HP-Server broken_modules=ahci als Bootparameter angeben

Rescue booten

mkdir /c
mount /dev/sda2 /c
mount --bind /dev /c/dev
mount --bind /proc /c/proc
mount --bind /sys /c/sys

chroot /c /bin/bash

grub-install.unsupported --recheck /dev/sda

exit

reboot

• openSUSE 11.2 64-Bit
• Minimales Text-System
  • mc, w3m, htop, rsync, XEN-Host-System
• Partitionierung
  • /dev/sda1 SWAP 2GB
  • /dev/sda2 / 20GB ext4
  • /dev/sda3 /daten 2.7TB ext4

yast lan

• br0 → eth0: 10.67.0.15/255.255.255.0
• br1 → eth1: 193.170.221.x/255.255.255.248
• br2 → eth2: 192.168.100.15/255.255.255.0

yast dns

• Hostname: feynman
• Domain: bgweiz.at
• DNS1: 193.170.221.1
• DNS2: 193.170.221.2

yast routing

• IPv4: 192.168.100.254 → br2

yast repositories

# | Alias                                | Name                                 | Aktiviert | Aktualisieren | Typ   
--+--------------------------------------+--------------------------------------+-----------+---------------+-------
1 | Aktualisierungen_für_openSUSE_11.2-0 | Aktualisierungen für openSUSE 11.2-0 | Ja        | Ja            | rpm-md
2 | openSUSE-11.2-Non-Oss                | openSUSE-11.2-Non-Oss                | Ja        | Nein          | yast2 
3 | openSUSE-11.2-Oss                    | openSUSE-11.2-Oss                    | Ja        | Nein          | yast2 

• Online-Update durchführen:

zypper ref
zypper up

wget http://download.opensuse.org/repositories/home:/ctso/openSUSE_11.2/noarch/munin-node-1.2.5-9.1.noarch.rpm

zypper in sysstat perl-Net-Server

rpm -Uvh munin-node-1.2.5-9.1.noarch.rpm 

• /etc/munin/munin-node.conf

host_name feynman
allow ^10\.67\.0\.2$

rcmunin-node restart

insserv munin-node

• Auf Hawking:
  • /etc/munin/munin.conf

[feynman]
    address 10.67.0.15
    use_node_name yes

• Holt zur Zeit alle Daten von Schrödinger

crontab -e

MAILTO=""

0 4 * * * /backup/run.sh > /dev/null 2>&1

mkdir /backup

• /backup/run.sh

#!/bin/bash

HOST="10.67.0.4"

rsync -a --delete -e ssh root@10.67.0.4:/daten/ /daten/.
sync

ssh-keygen -t rsa

ssh-copy-id -i .ssh/id_rsa.pub root@10.67.0.4

• 1f:00.0 RAID bus controller: 3ware Inc 9650SE SATA-II RAID PCIe (rev 01)

wget http://www.3ware.com/download/Escalade9690SA-Series/9.5.3/tw_cli-linux-x86_64-9.5.3.tgz

tar xvfz tw_cli-linux-x86_64-9.5.3.tgz

chmod 700 tw_cli

./tw_cli

//feynman> info c6

Unit  UnitType  Status         %RCmpl  %V/I/M  Stripe  Size(GB)  Cache  AVrfy
------------------------------------------------------------------------------
u0    RAID-5    INITIALIZING   -       36%     256K    2793.94   RiW    ON     

VPort Status         Unit Size      Type  Phy Encl-Slot    Model
------------------------------------------------------------------------------
p0    OK             u0   931.51 GB SATA  0   -            ST31000340NS        
p1    OK             u0   931.51 GB SATA  1   -            ST31000340NS        
p2    OK             u0   931.51 GB SATA  2   -            ST31000340NS        
p3    OK             u0   931.51 GB SATA  3   -            ST31000340NS       

zypper in yast2-nfs-server nfs-kernel-server

yast nfs-server

• Starten(x)
• NFSv4 [ ]
• /daten
• 10.67.0.*
• rw,no_root_squash,sync,no_subtree_check

• /boot/grub/menu.lst

default 0
timeout 4
gfxmenu (hd0,1)/boot/message

title Xen -- openSUSE 11.2 - 2.6.31.12-0.1
    root (hd0,1)
    kernel /boot/xen.gz
    module /boot/vmlinuz-2.6.31.12-0.1-xen root=/dev/disk/by-id/scsi-3600050e0800f8c005f6d00006cb10000-part2 resume=/dev/disk/by-id/scsi-3600050e0800f8c005f6d00006cb10000-part1 splash=silent quiet showopts
    module /boot/initrd-2.6.31.12-0.1-xen

title Desktop -- openSUSE 11.2 - 2.6.31.12-0.1
    root (hd0,1)
    kernel /boot/vmlinuz-2.6.31.12-0.1-desktop root=/dev/disk/by-id/scsi-3600050e0800f8c005f6d00006cb10000-part2 resume=/dev/disk/by-id/scsi-3600050e0800f8c005f6d00006cb10000-part1 splash=silent quiet showopts
    initrd /boot/initrd-2.6.31.12-0.1-desktop